|
Dart 18 Forum
Welcome to our forum. Feel free to post a message. The view and opinions expressed on this chat page forum are the responsibility of the individuals posting each notice. This forum is provided as a service to the members of UKIDA and does not necessarily reflect the view of UKIDA. |
|
| Return to Website | ||
 First |
 Prev |
 Reply |
 Forum |
Next  |
Last  |
| Viewing Page 1 of 1 (Total Posts: 3) |
| Author | Comment |
Stefan
 Mar 24, 08 - 10:42 AM |
reconditioning steering gear
Hello, I have an old Dart18 (~ 25 years old) and all the rudder gear seems to be worn out quite a bit. I would like to recondition it by putting in e.g. sleeves and other parts to make it working more precise again. For this it would be extreme helpful, if I could get hold of some dimensioning drawings of the rudder gear, it's position on the hulls and how the shaft and other important points are located in relation to the hulls. If you have any technical drawings or other relevant information that might be useful I would be very happy to hear from you. Best Regards from Hamburg, Germany Stefan (sorry for my bad English) |
|
Geoff
Mar 24th, 2008 - 1:38 PM |
Re: reconditioning steering gear
If you go to the Tech Talk button on the left of the front page of the website and select it you will then get a menu which includes all the drawings including the rudder assemblies under Class Drawings |
|
Stefan
Mar 24th, 2008 - 2:55 PM |
Re: Re: reconditioning steering gear
Thanks Geoff, but theese drawing I already know. Unfortunatelly they do not give any informaion about mounting details like angle against the hull etc. Stefan |
| First |
Prev |
Reply |
Forum |
Next |
Last |
bravenet.com