ROOF

Thank you for visiting the Routemaster Owner and Operator's Forum (ROOF). Please feel free to use this forum for the mature discussion of any issues of interest and relevance to Routemaster owners. Please do not use this board to publicise your feelings about individuals, National or Local Government or TFL policy. Owners of other London bus types in service during the 1950s, 60s and 70s are also welcome to contribute to this forum.

Please note, the ROOF website no longer exists. The link from the Forum does not work anymore.  Useful information and links from the website has been posted to the Forum.

Please do not respond to abusive posts but notify ROOFmoderator 1@outlook.com.


Return to Website  > Index
Recent Posts
 
ROOF
Start a New Topic 
Author
Comment
r
roythebus
Jul 12, 2011 - 10:34PM
RM propshaft lengths

With so many variants about, can anyone shed any light on the correct length prop shafts for a Scania engined RM, between flange faces. Urgently needed as I have to try and source a pair to take to Austria at the weekend!

My bus number (if any): RML2532

Email   Website
Jul 12th, 2011 - 10:34 PM
r
roy
Jul 13, 2011 - 8:05AM
Re: RM propshaft lengths

To the best of my knowledge Red Route buses at Northfleet have a Scania RML which I believe is 2420 Otherwise Ensign have a Scania, (1361 I think). Won't help with spares, but only a couple of hours from the Marsh with a tape measure. Also neither far from J W engineering at Barnehurst

r
roythebus
Jul 13, 2011 - 1:47PM
Re: RM propshaft lengths

Thanks, my customer has been under with the tape measure and both props are about 60" between flanges.

the Cummins front prop is 69"!

My bus number (if any): RML2532

Email   Website
Jul 13th, 2011 - 1:47 PM
Return to Website  > Index