Hello. Can anyone out there help me with dimmensions please for the heater matrix that fitted above the drivers cab & below the destination box. e.g. Height / width / depth and bracket depth from rear of matrix.
I require one so measurements are required please to see if I can get one made unless some one has one I can purchase.
Many thanks in anticipation.
Brian.

My bus number (if any): RML 2616

We had a few made up by Heathrow radiators about 20 years ago now.
I think they are still in business.
We did supply a damaged one which they duly rebuilt as an exercise for their then apprentice.

They also did a few engine radiators but they differed from original spec. They did however, work very well.

I might still have one. I got some made by Graysons many years ago, they also done a modified one with a blower motor so heat, sorry, slightly warm air, actually permeates the bus when it's not moving.

My bus number (if any): RML2532

Hi Roy,
Many thanks for your response. If you do still have one I would be interested. My e.mail address is brian@aerial.fsnet.co.uk. If you send me your phone number I will ring you.
Thanks in anticipation
Brian.

My bus number (if any): RNL2616