Hi All,

I have a client who needs an accurate external Routemaster drawing with dimensions.

Can anyone email me this or point me in the direction of where I can get one?

Many thanks

David

My bus number (if any): RM765, RM548 and RM1783

They are held at the LTM annexe archive and can be copied but they charge and has to be by appointment.

Some tome ago a set of exterior panel drawings were placed on the "other channel'. These were 3/4 views for both sides with all the LT part mos' for all exterior components but is not dimensional.

The LTM sets do carry all dimensions and there is also a modified set which is metricated dated 1987.

David
You can get "Routemaster Dimensioned Drawings" from Walkers. the RM Manual people Have a look here
http://www.thermmanual.com/RMmemorabilia.htm

I have some here but not able to scan as full size drawings.

My bus number (if any): RTL 960, RM 1585, RMC 1486 and several RTs

I have copies of the original LT drawings but they are about 4' x 3' and would cost a fortune to scan.

My bus number (if any): RML2532