Dear Forum members,

We are looking to source a Air test kit for gear box air pressure. We have tried in our local area, however we have found this to be elusive.

Does anyone know if i can purchase one or if one can be made please.

Thank you


Keith.

My bus number (if any): RM66 & RM308

Dear Keith Saunders,

A air test board comprising 2 gauges pressure rated at 0-200 psi with air hoses could still be available somewhere within this forum fraternity.

It was an ex LT garage tool, issued to all garages. The Pt No 352-27870 was until recently available for sale from Simon or Kevin of Squirrel Preservation.

It is possible to construct such a test rig with the appropriate materials.

The same test board can also be used on vehicles, RT codes,RM codes, DMS,& Ley Nat

Squirrel Mobile No's;_079495 16399 or 07956 107636

MJL

A suitable adaptor, a length of hose and a pressure gauge is available from branches of Pirtek.

My bus number (if any): RML2532

I didn't know Squirrel had the adapters, I couldn't find them so I made up a cheap and effective air pressure test system.

http://www.rmoof.co.uk/Gear%20box%20Air%20Pressures.htm

My bus number (if any): RMs 238, 471 and 2213, GS17

we did have three original ex LT ones that I eventually sold picture of these in the RMOOA magazine last year , I am sure he wont mind me mentioning Southern Transit down near Shoreham Sussex had my last one, ask for Neil otherwise Chris made up one is exact as near to original.i have never had any adapters.

My bus number (if any): RCL2238.RM1000 RT etc